Alpha Centauri Ti Gr2 Canopus

Alpha Centauri Ti Gr2 Canopus
Bulk Pricing:
Buy in bulk and save

Our replacement Extra Heavy Duty grade 2 titanium wire heater is used for the Canopus build and it is compatible with the Kiss Alpha GlobeKiss Alpha Centauri V2 System, and Omicron V4 and V5 vaporizers onlyIt is not compatible with the Kiss Alpha Centauri V3 System.

Up Tech’s KISS Alpha Centauri heaters deliver smoother vapor and pure flavor thanks to our second-generation porous black ceramic wicks. These wicks are designed to grip oils while slowly feeding them to our pure titanium wire for vaporization with unmatched purity. Incoming air is directed through the heating element, creating full-flavor vapor at low power and the tastiest clouds at higher wattages. Apply oil directly onto the top of the "barrel" and apply short bursts of power to saturate the ceramic. Once saturated, you're ready to go! Reapply as necessary to keep the wick fully saturated in oils.

These Extra-Heavy Duty heaters may be used at 6-19 watts with proper technique. When using lower power settings, you may need to increase your pulse length to achieve proper vapor production. Shorten your pulse length as you increase power. Higher power settings, up to 25 watts, may be used though require very short pulses of power and more frequent heater replacement.

These sub-ohm heating elements cold resistance range is 0.45-0.85Ω and if using them on a device other than Omicron V4 please consult the technical specifications of your device to ensure compatibility before purchasing. Due to the nature of grade 2 titanium, these coils fluctuate in resistance greatly and we suggest using them at 19w or below.

To fully unlock this unit's potential, a sub-ohm capable power supply like the Omicron V4 or V5 is required.

Not compatible with Omicron V1-V3, Minicron Lite, Minicron, O-Phos, Persei V1-V5, or older vaporizers.

Coils are warrantied against DOA / manufacturing defects within 24 hours of receipt, proof of purchase is required. Once the coil has been loaded, no warranty applies and no replacements may be offered.

Please test each new coil in a completely dark room by applying 5 second pulses of low power until a dull glow is seen. Do not allow the coil to glow red. If the coil does not heat after the fourth power cycle, please send a video showing the issue to with your Order ID within 24 hours of receipt, no exceptions.