Hercules Oil Cartridge

Hercules Oil Cartridge
Our Hercules Oil Cartridge was engineered as a clean sheet design to deliver the most and the most flavorful oil vapor possible with no compromises. We threw out all existing concepts for oil cartridges such as breakable heating wires, solder, glues, silica wicks, or nickel mesh and created a completely user serviceable cartridge that can always be cleaned and restored to brand new condition. The list of materials in the Hercules is short and simple; it is comprised of medical grade 316L stainless steel, Ai203 ceramic, Grade 2 titanium, PTFE (insulators), and gold plated brass (electrical connections).
This oil cartridge is designed to last a lifetime and eliminate the problem of burned out atomizers completely. We warranty its centrally placed ceramic heating rod with a one year guarantee. Grade 2 titanium wicks surround this heating rod and hold extracts in place via capillary action. The wicks keep extracts out of the heat path, off to the side, and allow them to feed gradually into the ceramic heating rod as the oils closest are vaporized gently without scalding or burning. This allows the Hercules to deliver unparalleled flavor and vapor production compared to any other portable concentrate vaporizer. When used properly, with passive draws between hits and cool downs at the end of each session, it can vaporize many grams of full melt extracts continually so long as you keep the coil saturated when it runs low.
The Hercules design incorporates one true idea that we like to strive for, total user freedom. It can vaporize essential oils and with careful technique, can vaporize loose leaf herbs or both together (Fractional Vaping.) Since it's introduction in 2012 our Hercules has set the standard for uncompromising vaporists, and we invite you to experience the tastiest, longest lasting concentrate cartridge on the market with UP Tech's Hercules.
What is included:
  • 1 x Hercules Oil Cartridge in 510 threading
  • 2 x Grade 2 Titanium Coils.
  • 1 x 0.8Ω Ceramic Heater (Installed)
  • 1 x Stainless Steel Tool
  • 1 x Cleaning Brush.  

Photographs do not reflect product currently shipping out

Technical Information:

The Hercules Oil Vaporizer is not an easy to use, take it out of the box & get going pen. It is a professional grade tool intended for advanced vaporists only and it must be cleaned, assembled and adjusted correctly to output vapor. It can vaporize a wide variety of materials, but works best with stable (thick/solid) full-melt extracts. It must be operated with a specific technique (taking care to passively draw instead of allowing hot oils to sit stagnant) or it may leak internally and fail to perform, but in the hands of someone who has learned how to use it the performance is unparalleled. Please do not hesitate to contact us if you have any questions about how to maintain and use the Hercules if you aren't sure it's a good fit before making a purchase.

Hercules is designed to operate within a suggested wattage range of 20-35 watts on 510 threaded devices. While we cannot recommend any specific third party power supplies for use with the Hercules, many box mods capable of firing at 0.8 ohms and providing up to 30w of power should be an eligible candidate. An electrical tester/multimeter is strongly suggested.

This is a native 510 threaded Hercules and it's not compatible with 601 threaded bottom insulators. It is not compatible with V1-V5 Persei with no exceptions.

The Hercules ceramic heating rod is warrantied for 1 year from date of purchase, while the bottom insulator and the adjustable center post are consumable items, and along with the remainder of the Hercules cartridge they are warrantied against DOA only and must be reported within 24 hours of receipt.. Proof of purchase is required for warranty work.