Kiss Alpha Centauri V3 Sirius Ceramic Coil

Kiss Alpha Centauri V3 Sirius Ceramic Coil
Bulk Pricing:
Buy in bulk and save

Our replacement Extra Heavy Duty grade 2 titanium wire heater is used for the Sirius build and it is only compatible with Kiss Alpha Centauri V3 System. It is not compatible with the Kiss Alpha Centauri V2 System.

UP Tech’s Kiss Alpha Centauri V3 heaters deliver smoother vapor and pure flavor thanks to our second-generation porous black ceramic wicks. These wicks are designed to grip oils while slowly feeding them to our pure titanium wire for vaporization with unmatched purity. Incoming air is directed across the heating element, creating vapor of unmatched flavor at low power and the thickest clouds possible at higher wattages.

These Extra-Heavy Duty heaters may be used at 6-19 watts with proper technique, up to 5 second pulses at 10 watts. Shorten your pulse length as power increases. Higher power settings (up to 25 watts) merit very short pulses of power and more frequent heater replacement.

These sub-ohm heating elements cold resistance range is 0.45-0.85 ohms and if using them on a device besides an Omicron V4 please consult the technical specifications of your device to ensure compatibility before purchasing. Due to the nature of grade 2 titanium these coils fluctuate in resistance greatly and we suggest using them at 19w or below.

To fully unlock this unit's potential, a sub ohm capable unit like the Omicron V5 is required.

Not compatible with Omicron V1-V3, Minicron Lite, Minicron, O-Phos, Persei V1-V5, or older vaporizers.

Coils are warrantied against DOA / manufacturing defects within 24 hours of receipt, proof of purchase is required. Once the coil has been loaded, no warranty applies and no replacements may be offered.

Please test each new coil in a completely dark room by applying 5 second pulses of low power until a dull glow is seen. Do not allow the coil to glow red. If the coil does not heat after the fourth power cycle, please send a video showing the issue to with your Order ID within 24 hours of receipt, no exceptions.