Our quartz coils have finally been given the EHD treatment and will now feature thicker-gauge titanium resistance wire and beefier leads.
You will receive a replacement dual coil featuring pure grade 2 titanium wire wrapped around quartz rods. It is compatible with the Kiss Alpha Globe, KISS Alpha Centauri V2 System and Omicron V4 and V5 vaporizers only. It is not compatible with the Kiss Alpha Centauri V3 System.
UP Tech’s Kiss Alpha heaters deliver pure vapor and fantastic flavor from a wire heater. These feature a quartz cup and walls and two solid quartz rods wrapped with thick gauge grade 2 titanium wire for serious vapor production, they're the hardest hitting coils available for the Alpha System!
To take full advantage of this heater we suggest use at 10-16 watts with pulses of 3-5 seconds for best performance. Higher wattage settings up to 19 watts merit shorter pulses of power and will require more frequent replacement.
These Ti wrapped Quartz heaters have a cold resistance of 0.3-0.4Ω and not all vaporizers or batteries may be capable of powering them. Due to the nature of grade 2 titanium these coils fluctuate in resistance greatly and we suggest using them at 13w or below. Please ask if your vaporizer is compatible before ordering.
To fully unlock this unit's potential, a sub ohm-capable vaporizer like the Omicron V4 or V5 is required.
Not compatible with Omicron V1-V3, Minicron Lite, Minicron, O-Phos, Persei V1-V5, or older vaporizers.