Triton Dual Ti Gr 2 SiC Coil

Triton Dual Ti Gr 2 SiC Coil
Bulk Pricing:
Buy in bulk and save

When it comes to being the best the Triton is it, It has taken us 4 plus years of research and development to finally bring to market a Oil vaporization system that is so advanced that it leaves everything else in the dust. The Triton Extra Heavy Duty (EHD) Dual Titanium Grade 2 heater is wrapped around our 4.5mm third generation SiC wicks and is designed to be leak proof when filled with 0.7ml of liquid. The unit can take stable concentrates and runny concentrates. This means the user is capable of loading up to a full days use without having any issues of thinking if it is going to leak. Full days use = 0.3ml of oil. Recommended fill 0.05-0.3ml

The Triton delivers smoother vapor and pure flavor thanks to our third-generation porous SiC wicks. These wicks are designed to grip oils while slowly feeding them to our pure titanium grade 2 wire for vaporization with unmatched purity that will match your e-nail. Incoming air is directed across the heating element, creating vapor of unmatched flavor at low power and the thickest clouds possible at higher wattages.

These EHD heaters may be used at 20 - 35 watts in temperature control only. A unit like the Persei v6 is what is needed to properly drive these heaters .

These sub-ohm heating elements cold resistance range is 0.35-0.55Ω and if using them on a device besides an Persei v6 please consult the technical specifications of your device to ensure compatibility before purchasing. Due to the nature of grade 2 titanium these heaters fluctuate in resistance greatly and we suggest using them at 35w or below with proper temperature control.

To fully unlock this unit's potential, a sub ohm capable unit like the Persei v6 is required.



  • Complete Silicon and PTFE Free
  • No Glues
  • No Welds
  • No Solder
  • No Silica
  • No Nickel Wires
  • No Crimps
  • No Ceramic Paste
  • Gold Plated Brass connectors
  • High Grade Stainless Steel Shell

Not compatible with any of our Omicron V1-V5, Minicron Lite, Minicron, O-Phos, Persei V1-V5, or older vaporizers.

Coils are warrantied against DOA / manufacturing defects within 24 hours of receipt, proof of purchase is required. Once the coil has been loaded, no warranty applies and no replacements may be offered.

Please test each new coil in a completely dark room by applying 5 second pulses of low power until a dull glow is seen. Do not allow the coil to glow red. If the coil does not heat after the fourth power cycle, please send a video showing the issue to with your Order ID within 24 hours of receipt, no exceptions.